The machine is suitable for grinding end face and external cylindrical parts with shoulder or gear shaft of automobile, motorbicycle, compressor industries, etc.

The machine employs the imported CNC system and 2-axes, of which 2 axes are simultaneous movement. Wheelhead and worktable all employ “flat-V”combined guideway with TURCITE, and the spindle of grinding wheel adopts combined hydrodynamic and hydrostatic press bearing unit to supply oil independently. Headstock is driven by conversion motor and transducer, and stepless speed regulation can be realized. Tailstock features sleeve sleeve structure. CNC system controls dressing interpolation and automatic compensation of grinding wheel.

The machine can be furnished with on-line axial and radial automatic measuring system and dynamic balance device.

TECHNICAL SPECIFICATION
Max. grinding diameter			mm	Φ200
Min. grinding diameter			mm	Φ5
Recommend diameter to be ground			mm	Φ15-Φ120
Max. grinding length			mm	500、750
Max. grindable width of end face			mm	10
Max. workpiece weight			kg	50
Wheel velocity			m/s	36-48 Or constant linear velocity
Tailstock retraction			mm	30
Center height			mm	125
Headstock center			morse	4
Tailstock center			morse	4
Grinding wheel			mm	Ф500×50-75×Ф203
Total power of motors			KW	≥22
Outline dimension of machine			mm	3930×2310×1850
Net weight			kg	约5000
Gross weight			kg	约6000
WORKING ACCURACY
Roundness			mm	0.0015
Uniformity of diameter in longitudinal section			mm	0.003
Perpendicularity			mm	0.005
Roughness			μm	Ra0.4 External circle	Ra0.8 End face
MAIN ACCESSORIES
Wheel balancing arbor	1set	Wheel dismount ool				1set
Wheel lifter	1set	Driving dog				1set
Wheel with flange	2sets	Parallel wedge				1set